Non Yellowing Silicone PU Protective Coating Anti UV PU Ink For Outdoor Silicone Bracelets

Silicone Rubber Polyurethane (PU) Coating Ink 

Product Description

For printing on silicone, rubber, or synthetics, this ink is a workhorse. It grips well, bends without cracking, and lasts through heavy use. It’s also resistant to scuffs, solvents, and weather changes. Just apply heat or UV for a fast cure, and you’ll get vivid colors and a comfortable, soft-feel surface.

Application

Mainly applied to silicone cellphone case, silicone keypad and other silicone rubber products.

Application Ratio

Silicone ink: 100g

Mixer(catalyst): 2~3g

Thinner: 300~500g

Processing

To prepare your coating, start by adding the hardener to the ink at a ratio of 2 to 3 parts per 100 in a cleaning barrel, stirring until they are fully integrated. Next, thin this paste by adding 3 to 5 times its own volume of thinner—either White Gas or Dimethyl-benzene—and mix this combination for about 5 to 10 minutes. After that, don’t forget to strain the batch twice through a 300-mesh filter before spraying. You should also plan your workflow around the 12-hour activation window and ensure your room sits steadily at 22°C.

All the above physical data only for reference.

Baking method

A.Oven:Baking at 180℃ for 20 minutes.

B.IR strip: Baking at constant temperature 200℃ for 7 minutes

Attention

1. This agent including volatile solvent, please keep ventilating and far away from heat and open flame.

2. Avoid skin contact for a long time and vapor inhalation

3. Washing with soap once skin contact.

Storage

Stored at room temperature for 6 months with any mixing.

Packing

1KG/Bottle.