ROHS Compliant Silicone PU Protective Ink Weather Resistant PU Coating For Silicone Daily Goods

Silicone Rubber Polyurethane (PU) Coating Ink 

Product Description

Worried about prints peeling or fading on rubber or silicone? This PU ink solves that—it sticks tenaciously, stays pliable, and withstands friction, solvents, and outdoor exposure. It sets quickly with heat or UV, giving you rich, long-lasting colors and a gentle hand feel.

Application

Mainly applied to silicone cellphone case, silicone keypad and other silicone rubber products.

Application Ratio

Silicone ink: 100g

Mixer(catalyst): 2~3g

Thinner: 300~500g

Processing

Maintain a constant 22°C working temperature and keep in mind a strict 12-hour pot life after mixing. To prepare the coating: combine ink with catalyst at a 100:2-3 ratio in a barrel, then cut the viscosity with 3–5 measures of thinner (White Gas or Dimethyl-benzene). Stir this mix for 5–10 minutes and, crucially, pass it through a 300-mesh filter screen on two separate occasions before transferring it to your spray gun.

All the above physical data only for reference.

Baking method

A.Oven:Baking at 180℃ for 20 minutes.

B.IR strip: Baking at constant temperature 200℃ for 7 minutes

Attention

1. This agent including volatile solvent, please keep ventilating and far away from heat and open flame.

2. Avoid skin contact for a long time and vapor inhalation

3. Washing with soap once skin contact.

Storage

Stored at room temperature for 6 months with any mixing.

Packing

1KG/Bottle.