Instant Cyanoacrylate Based Adhesive For Metal Glass Plastic Rubber Bonding

 Kanglibang Fast-setting Instant Adhesive For Metal Glass Plastic

Description: 

Kanglibang instant adhesives are ideal for bonding small- to medium-sized parts with close-fitting, smooth surfaces. They provide fast cure speeds and excellent bond strengths to a wide variety of substrates, including hard-to-bond materials. It is commonly used to quickly and reliably bond a wide range of materials such as metal, rubber, glass, wood, and plastics. Versatile and easy to operate, it is ideal for immediate repair work.

1, Preparation-Cleaning

It is recommended to use alcohol/ xylene for the surface to be bonded to degrease and clean surfaces prior to applying the adhesive.

2, Preparation- Priming 

To improve adhesion on difficult to bond plastic surfaces,can apply KL-039-1 to the bond area by brushing. Avoid applying excess primer. Allow the primer to dry.

3, Apply

Apply adhesive onto one side/part.

4, Assembly

Assemble parts immediately. The parts should be accurately located as the short fixture time leaves little opportunity for adjustment. Bond should be held or clamped until the adhesive has fixtured.

FAQ:

1. Q: If the fingers are glued, how do I separate them?
* A: Due to its high moisture content, cyanoacrylates bond the skin quickly. A simple way to do this is to turn a pen or pencil around the bond and apply a peeling force to the adhesive layer to separate the skin between the fingers. You can also try warm water and soap.